Blanket and roller wash printing ink roller wash
|Payment Type:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW,FCA,CPT,CIP|
|Min. Order:||1000 Kilogram|
|Delivery Time:||15 Days|
|Place of Origin:||Shanghai|
|Port:||Shanghai Outer Harbour,Shanghai Yangshan Port,Wusong Port|
Model No.: 001
Blanket and roller wash Printing Ink roller wash
Blanket Wash is a solvent based roller wash that fit a variety of needs.
A relative fast drying wash that can be used on the offset blanket as well as the inking rollers of the printing press.
Application: suitable for all kinds of offset printing ink, thermosetting ink. safety, environmental protection, energy-efficient.
Offset printing ink roller wash Features:* Excellent solvent power, thorough and quick wash up.
* Safer working conditions, less restrictions for transport and stocking.
* Water miscible, ink and paper residues can be removed in one step.
* Contains Corrosion Inhibitors, for protecting sensitive press parts.
* Low swelling effect on rubber compounds, gentle to the rubber rollers and blankets.
* Low flammability, no damage to seals, pipes motors and other components.
* Free of aromatic solvents, low odor.
1. Put a proper amount of Blanket and roller cleaner in a small plastic bottle. Drill a small hole with a diameter of 0.5 mm on the bottle cap.
2. Check if the scraper is in good condition. If it is damaged, it should be replaced.
3. Check if the ink roller is horizontal and it should be replaced if it is too old (otherwise the amount of cleaning agent will increase during the cleaning process)
4. Check whether the rotating roller, PS plate, and ink roller are completely separated, Separate cleaning can wash quickly and clean.
5. Before starting the machine, spray the cleaner on the ink fountain and the rotating roller. After the ink roller is washed, scrub the ink fountain and turn the roller.Turn on the machine (up to the highest speed) and then sprinkle the proper amount of ink cleaner on the ink roller and spray it back and forth 2-3 times.The interval between showers is 15-20 seconds (large machine time is longer). Wait 1-2 minutes after operationTighten the ink (this should be paid special attention).
6. After tightening the ink scraper, the connection between the ink scraper and the ink roller is good, and the ink on the ink roller is completely scraped off after about 1 minute.If the ink roller is not clean, you should continue to add the appropriate amount of ink cleaner to the ink roller until it is clean.
7. The rubber roller is cleaned. After the water is flushed on the roller, the ink scrapes off the milky white liquid. After the flushing continues until the scraper is clean, it can be stopped. The entire cleaning process takes 4-5 minutes.
Shanghai Chenjie Printing Material Co., LTD
Shanghai chenjie printing materials co.,LTD. Is a printing materials technology research and development and sells all kind of printing materials company. Headquartered in Shanghai The company was originally set up for research and development the all non-alcoholic fountain solution. In order to fill in the printing field of environmental printing. research and development the all non-alcoholic fountain solution,it is a good solution to he traditional difficult to overcome the problem of energy saving ,environmental protection ,safety and soon. Improve efficiency for corporate printing,cost saving. Nowadays,the company adheres to the [conscientious" enterprise management culture
- Company Name: Shanghai Chenjie Printing Material Co., LTD
- Representative: jiannan Hu
- Product/Service: Fountian solution , Alcohol-free fountian solution , Roller wash , Plate cleaner , Spray powder , Printing plate
- Capital (Million US $): 500000RMB
- Year Established: 2014
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 61% - 70%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 10
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): Below 1,000 square meters
- Factory Location: 浙江平湖市振兴西路55号
- Contact Person: Ms. Shado liu
- Tel: 86-021-61311286